{"product_id":"pla-filament-easyfil-pla-1-75mm-glow-in-the-dark-green-750-gram-3d-printer-filament","title":"PLA Filament EasyFil PLA 1.75mm Glow in the Dark Green 750 gram 3D Printer Filament","description":"\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eEasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF \/ FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behavior and inter layer adhesion make EasyFil PLA an extremely easy to print filament. \u003cbr\u003eVery easy to print, Warp-free printing and no deformation after cooling\u003cbr\u003eImproved flowing behaviour and inter-layer adhesion\u003cbr\u003eGood first layer adhesion to several (un)heated print surfaces\u003cbr\u003eSlightly softer than standard PLA resulting in improved strength and impact resistance\u003cbr\u003eAlmost odorless processing\/printing\u003cbr\u003eBiodegradable\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eGeneral printing guidelines\u003c\/p\u003e\r\n\u003ctable border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd width=\"175\"\u003e\r\n\u003cp\u003eNozzle size: ≥ 0.15mm\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd width=\"175\"\u003e\r\n\u003cp\u003eLayer height: ≥ 0.1mm\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd width=\"175\"\u003e\r\n\u003cp\u003eFlow rate: ± 100%\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"even\"\u003e\r\n\u003ctd width=\"175\"\u003e\r\n\u003cp\u003ePrint temp: ± 180 - 220° C\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd width=\"175\"\u003e\r\n\u003cp\u003ePrint speed: Medium\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd width=\"175\"\u003e\r\n\u003cp\u003eRetraction: Yes - 5mm\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"\"\u003e\r\n\u003ctd width=\"175\"\u003e\r\n\u003cp\u003eHeat bed: ± 0 - 65° C\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd width=\"175\"\u003e\r\n\u003cp\u003eFan speed: 50-100%\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd width=\"175\"\u003e\r\n\u003cp\u003eExperience level: Beginner\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e\u003cem\u003eAbove displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003eFilament length\u003c\/p\u003e\r\n\u003ctable border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr class=\"even\"\u003e\r\n\u003ctd width=\"89\"\u003e\r\n\u003cp\u003e\u003cem\u003eρ: 1.24g\/cc\u003c\/em\u003e\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd width=\"88\"\u003e\r\n\u003cp\u003e50 gr coil\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd width=\"88\"\u003e\r\n\u003cp\u003e0.75 Kg spool\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"\"\u003e\r\n\u003ctd width=\"89\"\u003e\r\n\u003cp\u003eØ 1.75mm\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd width=\"88\"\u003e\r\n\u003cp\u003e± 16.8m\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd width=\"88\"\u003e\r\n\u003cp\u003e± 251m\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr class=\"even\"\u003e\r\n\u003ctd width=\"89\"\u003e\r\n\u003cp\u003eØ 2.85mm\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd width=\"88\"\u003e\r\n\u003cp\u003e± 6.3m\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd width=\"88\"\u003e\r\n\u003cp\u003e± 95m\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003eAbrasiveness \u003cbr\u003ePlease be aware that Glow in the Dark filaments contain a relatively high concentration of extremely hard phosphorous particles, which have an abrasive nature.  In general these phosphorous particles will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys.\u003c\/p\u003e\r\n\u003cp\u003eProduct export information \u003cbr\u003eHS Code: 39169090 \u003cbr\u003eDescription: Monofilament \u003cbr\u003eCountry of origin: the Netherlands\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePackage Content\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e1x PLA Filament EasyFil PLA 1.75mm Glow in the Dark Green 750 gram 3D Printer Filament\u003c\/p\u003e","brand":"RABSDirect.com.au","offers":[{"title":"Default Title","offer_id":41888786481305,"sku":"V177-175EPLA-GLGR-0750","price":176.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/6274\/3705\/products\/V177-175EPLA-GLGR-0750_EasyFil-PLA-Glow-in-the-dark-Green-175-750g__46465_1.jpg?v=1662446897","url":"https:\/\/www.rabsdirect.com.au\/products\/pla-filament-easyfil-pla-1-75mm-glow-in-the-dark-green-750-gram-3d-printer-filament","provider":"RABSDirect.com.au","version":"1.0","type":"link"}